IWILL Global :
Product Search :
Product Home > Desktop > P4SE2

P4SE2
BIOS
Driver
Manual


P4SE2 Specification

Processor LAN

Single processor for 478 Pentium 4 at 400/533/800MTS
System Bus: 100/133/200MHz
Auto detect CPU type to set external clock and multiplier
CPU external clock adjustment at 1MHz/step by BIOS
Maximum CPU clock setting in the BIOS up to 250MHz

RealTek 10/100 MbE on board
RJ-12 connector stack on dual USB near by PS/2 Keyboard
Wake on LAN connector for each LAN controller
Chipset USB
MCH: Springdale-PE
ICH5
Winbond Super I/O: W83627HF
2 x USB2.0 external port on the back panel
Internal pin header to offer Six USB2.0 ports for front panel
System memory Audio
Support Single/Dual channel DDR 266/333/400
Two pair DIMMs(Four rows)
Unbuffer without ECC DDR SDRAM
Support 128Mb/256Mb/512Mb technology memory
Up to 2GB for single channel configuration and 4GB in dual channel configuration
Peak memory bandwidth up to 2.7GB/s for single channel mode and 5.4GB/s in dual channel mode
AC��97
1 x audio connector at rear panel to support LINE IN/LINE OUT/STEREO MIC IN
Support STEREO MIC IN/LINE OUT pin header for front panel
1 x 4-pin CD-ROM Audio In header
1 x 4-pin AUX header
BIOS I/O Interface
Award BIOS
Flash write Protection for BIOS
Write Protection for memory SPD EEPROMs
Support ACPI S1, S3(option)
2 x IDE connector (Bus Master with Enhanced) to support Ultra DMA 33/ATA66/ATA100 IDE drives and ATAPI compliant devices
2 x SATA connector
1 x Floppy Connector for up to two drives
2 x UART connector
1 x 25pin ECP/EPP Parallet Port
1 x PS/2 Keyboard
1 x PS/2 Mouse
1 x internal Smbus connector
1 x internal WOM connector


Products specification and details may change without notice.
Actual products may look different from the photo.
Copyright 2004, IWILL Corporation. All Rights Reserved.

The specification and pictures are subject to change without notice.
Copyright 2004 IWILL Corporation. All rights reserved.