Enclosure |
Integrated Storage Controller |
• |
Industry 19" rack-mountable 5U chassis |
• |
D 28" x W 19" x H 8.75" |
• |
(736 x 427 x 221.6mm ) |
|
|
Processor |
Storage |
• |
Support AMD Opteron Socket 940 CPUs |
• |
Support up to Octal AMD Opteron™ processors |
|
• |
Support 2 internal IDE HDD Bays |
• |
Support 7 x 5.25" drive Bays space (for HDD and CD-ROM) |
|
Chipset |
Networking |
• |
AMD 8131 PCI-X Tunnel chip |
• |
AMD 8111 I/O control Hub |
• |
Winbond® W83627THF Super I/O chip |
• |
ADM 1026 hardware monitoring IC |
|
• |
4 x Gigabit Ethernet ports (Intel 82546EB dual�Vchannel GbE LAN controller connected to PCI-X) |
• |
1 x 10/100 Fast Ethernet port (Intel 82551QM) |
|
System Memory |
Server Management |
• |
Support DDR ECC Registered SDRAM memory module |
• |
Support up to 64GB memory capacity |
• |
Support PC3200/PC2700/2100 |
• |
Total 32 x 184pin 2.5V DIMM slots |
|
• |
Support IWILL Server Management BMC card |
• |
Support IPMI 1.5 compliant |
• |
Support KCS interface for inband management |
• |
Support RMCP protocol for out-of-band management |
|
BIOS |
Motherboard |
• |
AMI BIOS 8.0 on 4Mbit flash ROM |
• |
Support APM 1.2 and ACPI 1.0 |
• |
Support S1, S4 and S5 mode |
|
• |
2 x IWILL QK8S-HT Quad AMD Opteron™ system board |
• |
1 x IWILL GEIO I/O board |
• |
1 x IWILL XSBP board |
• |
1 x IWILL KVMB board |
|
Graphics |
Power Supply |
• |
ATI Rage XL PCI Graphics Controller |
• |
8MB Frame Buffer of video memory |
|
• |
EPS 12V , 1U , 1300W N + 1 power supply |
• |
4 x Power AC input |
|
Expansion Slots |
Working Temperature |
• |
4 x PCI-X 64bit 133/100/66MHz expansion slots |
|
• |
Opterating: 0c ~ 35c |
• |
Storage:-10 ~ 70c |
|
Rear I/O ports |
Gross weight |
• |
4 x RJ-45 ports |
• |
1 x PS/2 Keyboard port |
• |
4 x USB 1.1 ports |
• |
2 x 9-pin UART Serial port |
• |
1 x 15-pin VGA port |
|
|
Front panel Features |
Package |
• |
1 x RJ-45 connector for server management |
• |
2 x USB 1.1 ports |
• |
1 x LAN LEDs |
• |
1 x HDD and Power LEDs |
• |
Power on/off and System Reset button |
|
• |
8 x Active Heatsinks |
• |
1 x chassis sliding rail |
• |
4 x power cords |
• |
1 x Power Installation CD Kit (including derivers and software) |
• |
1 x Hardware User Guide |
• |
1 x IWILL Server Management CD(including UMS derivers) |
• |
1 x IWILL Server Management User Guide |
|
System cooling |
|
• |
3 x Back 40*40*28mm 13000RPM fans |
• |
6 x Back 60*60*38mm 8000RPM fans |
• |
1 x Middle 60*60*38mm 8000RPM fans |
|
|