IWILL Global :
Product Search :
Product Home > Workstation > P4CT


P4CT Specification

Processor LAN

Supports Socket 478 Intel Pentium 4 processors
Supports 800/533/400MHz Intel Pentium 4 processors
Supports Pentium 4 speeds up to 3 GHz or above
Intel Hyper-Threading Technology ready

Notice :
For 400MHz FSB processor, it is supported only under the following condition:
(1) Northwood core
(2) Vcore less than 1.6V

Intel PRO/1000 CT Network Connection
Operating at 266MB/s CSA interface
1 x RJ-45 LAN connector
Chipset Serial ATA
Intel 875P Chipset + ICH5R Support two internal SATA ports running at 1.5GB/s
Support RAID 0, 1
System memory IEEE 1394
Support Dual Channel DDR400/333/266 memory modules
4 DIMMs support up to 4GB
Support Unbuffered memory modules with ECC/non-ECC technology
Support 128MB/256MB/512MB/1GB memory modules
1 x AGP Slot (AGP 8X/4X mode)
5 x PCI 2.2 Bus Master Slots
IDE Audio
Dual ATA 100/66/33 IDE channels
Supports ATAPI IDE CD-ROM, ZIP-100 & LS-120
6-CH Audio
Realtek ALC650 audio controller
Support Line In/Line Out/MIC in at rear panel
Support Rear Out/Center Out at rear panel
1 x 4-pin CD-ROM audio in header
1 x 4-pin AUX header
BIOS I/O Interface
Award BIOS PS/2 mouse and keyboard connector with -wake-up function
8 x USB ports (4 x external ports)
3 x audio ports (Line-IN, Line-OUT, MIC)
1 x 25-pin SPP/ECP/EPP Parallel port
1 x 9-pin 16550-based serial port
1 x internal COM2 header
Center out/Rear out/IEEE-1394 at COM2
1 x internal IR connector
1 x WOL header
1 x floppy port
Board Size UPC Code
ATX form factor
12" x 10"
Power EAN Code
ATX 12V PSU 4-718858-36310-4

Products specification and details may change without notice.
Actual products may look different from the photo.
Copyright 2004, IWILL Corporation. All Rights Reserved.

The specification and pictures are subject to change without notice.
Copyright 2004 IWILL Corporation. All rights reserved.