| Processor |
USB |
|
Supports dual AMD Opteron™ Socket 940 CPU
Supports 1.8GHz or higher
HyperTransport™ Interface 1 GHz
Dual VRD
|
four(4) USB 2.0 ports at the rear panel
Two internal connectors for four front panel USB 2.0 ports |
| Chipset |
On board IDE |
NVIDIA nFORCE 250 Pro MCP
AMD-8131 HyperTransport™ PCI-X 1.0 Tunnel |
Dual ATA 133/100/66/33 IDE Channels
Support ATAPI IDE CD-ROM, ZIP-100 & LS-120 |
| System memory |
On board SATA |
Supports Dual Channel DDR266/333/400 DRAM memory module
4+4 DIMMs support up to 16GB
Support Registered ECC memory modules
Support 128MB/256MB/512MB/1GB/2GB Memory Module |
4 Serial ATA ports by Silicon Image Sil3114 SATA Controller
Support RAID 0, 1, and 0+1
2 Serial ATA ports by nforce3 Pro250 with NVRAID
|
| Graphics |
Expansion Slot |
1 x AGP slot supports AGP Pro/8X
AGP 3.0 specification (1.5V) |
1 x PCI-X 64bit/133MHz slot or 2x PCI-X 64bit/100MHz slots
2 x PCI-X 64bit/66MHz slots
1 x 32bit/33MHz PCI slot
PCI 2.2 Compliant
PCI-X 1.0 specification compliant |
| Audio |
Rear Panel I/O |
|
Integrated Realtek ALC655 audio controller
6 Channel audio ready with S/PDIF OUT
Compliant with AC97 Rev 2.3 specifications
16-bit Stereo full-duplex CODEC with 48KHz sampling rate
|
PS/2 mouse and keyboard connector
3 x Audio ports (Line-IN, Line-OUT, MIC)
1 x 25-pin SPP/ECP/EPP parallel port
1 x 9-pin 16550-based serial port
1 x SPDIF Out
1 x IEEE-1394 Port
Rear Out and Center Out
4x USB2.0 ports
1 x RJ-45 Port |
| LAN |
System BIOS |
| Gigabit Ethernet controller with nVIDIA security |
AMI BIOS
Flash write protection for BIOS
Multiple boot support |
| IEEE-1394 |
From Factor |
TI TSB43AB22 IEEE-1394 controller
2 x 1394a ports (1 x external port, 1 x internal connector)
Fully support IEEE Std 1394a-2000
Cable port data rate of 100Mbs, 200Mbs, and 400Mbs |
E-ATX Form Factor
12" x 13"
EPS 12V Power Supply |
